A previous build - the Rx1

The picture to the left is of a sailing skiff I built a few years back (Rx1). Unfortunately I didn't really do enough development work on it and so didn't do it justice.

I had planned to add small buoyancy pods to make sailing upright in light winds easier but after some rudder problems I moved onto another project. I really must try to stick with one thing!!

The hull was made from closed cell foam (XPS) reinforced with ply and fibre glass. The outrigger frame was very light, made from 1.6mm aloy tubing.

I put my latest skiff build on the weighing scales the other day and it came in at 18Kg. By the time I have finished I expect the hull weight to come in at around 20Kg. A Laser Pico weighs 60Kg so it is quite a light hull.

Kayak Sailing Today

I was planning to work on my sailing skiff today but after checking the conditions last night, weather and tide was perfect for a bit of kayak sailing. I got my gear out of the garage and headed for Exmouth.

I normally like to sail off the sea front and zap along the coast but as the tides were right I went to what is locally known as the duck pond and set off up the estuary towards Starcross and Lympstone.

I had a fantastic time and was sailing at quite a speed, burying the amas frequently.

I find that every time I go out on my sailing kayak I always think of modifications I can do to improve the current design, making modifications is almost as much fun as the actual sailing for me.

Anyway, it was a fantastic morning. For anyone wanting a cheap way of getting out sailing on the open water I would definately recommend kayak sailing. If you want a bit more info on this type of rig, see me kayak sailing web site.